Follow all instructions for your project. It may appear like short cuts can be taken or that steps can be eliminated, but you’ll see why they were there in the end result. These directions are made to help you make the best quality project.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Glue can cause nasty stains on your finished work. You can eliminate stains easily using a piece of tape. First, clamp your wood together without any glue. Put a piece of tape over the joint. Cut the tape on the joint with a sharp knife. You can now clamp the wood together with glue and any excess will ooze onto the tape, not the wood.
Wet the lumber before you sand. The moisture will cause the grain to come up. This could help eliminate fine scratches. Your final product will be very professional looking. It, quite possibly, could save you work in the long run, too. Make sure that your work area is always clean and organized. It is easiest to work when you know where everything and you do not have to work around a mess. To keep your area nice at all times you should put things away as you work and discard waste as it is produced. Always check your tools before you begin using them. Woodworking with a faulty or overused tool can easily lead to a serious injury or destruction of your materials. To make sure that this does not happen to you take the time to thoroughly inspect your tools from top to bottom.
Buy some scrap wood and use it to practice on. Scrap wood is really cheap, and it makes for great practice wood. Use it to try new skills that you’re learning. Practice with new tools on it. Make your mistakes here, not when it counts. You’ll be happy you did in terms of budget.
Check out your local library for books on woodworking. You will likely find books that contain tips, special skills or even step-by-step guides that can take you from start to finish on a project. A library can be wonderful source of information that people tend to forget when they are looking for knowledge, so do not let this resource slip your mind.
If you don’t want glue to stain the piece of wood you’re working on, it’s a good idea to use tape first. Clamp together the two pieces you want to glue, and then put tape on the joints. Then use a sharp knife to cut the piecs apart. That way, when you glue together your wood, excess glue will get on tape and not the wood. Always wear proper eye protection before using any power tools. Wood chips can fly and stab you in the eye resulting in a trip to the emergency room. To protect yourself wear safety glasses that have side shield to help protect your eyes from flying debris produced from using power tools.
As was mentioned earlier, the tips learned here will assist a woodworker of any level. It’s pretty much a given that you just read something that you can use to help in your next project. Now get started! Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too. When working with wood, consider the grade of wood you are using. Wood can be costly and it is not always necessary to use a high-cost wood. If budget is a concern, look at the durability and strength of different woods that may come in a little cheaper and still work for your project.
Try to learn as much you can about the new technologies available to you for your woodworking needs. Because of advances in precision tools in recent years you can likely find the things that you need so that you can do a perfect job every time that you tackle a woodworking project.
Always be on the lookout for good woodworking tips. If you meet professionals, ask them for their best tips. If you find a magazine chock full with tips, pick it up so that you can keep it in your archive. Even record TV shows that have woodworking in them to glean any tips you my find there.